![]() This item allows you to set the voltage for the DRAM. ![]() You can manually change it to 1.350V.Īsus Z170-K motherboard Manual: page 2.5.19 In that menu you will see "DRAM Voltage'', is the default setting. In your UEFI bios go to "Advanced Mode" and select the "Ai Tweaker" menu. Does it mean that the motherboard can't provide 1.35 V or that I should somehow manually change that?Īnd what should the timing be and how can I change it :/ But when I enable XMP, I see this(below). What I've realised is that I can't manually change dram voltage for some reason. Or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory Lower frequency than the vendor-marked value. Under the default state, some memory modules for overclocking may operate at a (SPD), which is the standard way of accessing information from a memory module. ![]() The default memory operation frequency is dependent on its Serial Presence Detect.2133MHz is the fastest speed your motherboard will run memory without overclocking, so don't bother to Enable XMP, just set your memory speed, voltage and timings manually in the UEFI bios. Make sure the ram is located in slots "DIMM_A2" and "DIMM_A4".ģ. The Asus Z170-A motherboard is on the G.SKILL F4-3000C15D-8GVRB QVL list, so your Z170-K model should be close enough.Ģ.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |